Aves Apoxie Sculpt – Modelling Compound – Earth Colour/Color Kit 184g

Apoxie Sculpt combines the benefits of sculpting clay with the adhesive power of epoxy.

These colour kits are simply the pre-coloured Apoxie Sculpt sold at a great price for 4 colours in a kit.

Apoxie Sculpt adheres to nearly any surface and is great for sculpting, embellishing, bonding and filling almost anything. It accepts paints, stains, mica powders and much more for a variety of finishing options. It works well with texture stamps, moulds, paints, stains, mica powders and more for additional creative styles. Its smooth, putty-like consistency is easy to mix and use. Self-hardening means no baking and it cures hard in 24 hours to a semi-gloss finish.

Discover unlimited uses!

• Superior Detail
• 1-3 hour working time
• Self Hardening
• 0% Shrinkage & Cracking
• Exterior Quality
• Permanent Semi-gloss finish
• Waterproof
• Sulphur Free
• Marine & Outdoor Quality

There are 3 kits to try with12 colours – mix and match – try them all.

EARTH KIT: Pink – Natural – Orange – Bronze   0.4lb/184g

Directions:

1. Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools.
2. Mix & knead together for 2 minutes until thoroughly combined and a uniform colour is achieved. Note incomplete mixing will give poor results. *Allow mixed product to rest 5 minutes for better handling.
3. Apoxie® Sculpt is ready to use; working time is 1- 3 hours. Shape as desired. Smooth or texture with a wet finger, brush, Q-tip or sculpting tool. Self-hardens (NO?BAKING); 24 hour full cure.
4. Clean up: soap & water or Aves® Safety Solvent (very helpful for smoothing, removing finger prints & cleaning up pigment / product residue before set-up). Finish as desired. Paint wet or dry. ?Marine & Exterior Quality!

Safe Handling:

• Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B.
• Wear a dust mask and safety glasses when sanding cured product.
• Keep out of reach of children.
• Safe for adults when used as directed.
• 24 hr. full cure required for hard finishing purposes such as sanding, carving, drilling, machining, etc., without chipping, cracking or flaking.
• Keep containers sealed when not in use.
• Freeze-Thaw-Stable.

Working Time – A Guide:

• 1/2 hour: Sticky & most adhesive
• 1 to 2 hours: Easy to work with
• 2 to 3 hours: Setting up, form-able detail
• 24 hours: Hard, cured & waterproof

There are 12 different colours of Apoxie® Sculpt that you can mix & match plus a Super White Apoxie® for more colour blending options.